Tuesday, June 15, 2010

conclusion

The aim of the experiment was to investigate which soil absorbs the greatest amount of pollutants in the environment using the mediums: white sand, potting mix and soil from a garden. The pollutants involved in the experiment were, vegetable oil, petrol and engine coolant. The potting mix, which has the greatest porosity, absorbed the most amount of the pollutant and the hypothesis was therefore supported.
like EVERYTHINGELSE i've done.. simple and sweet!
ABSTRACT:
Soil pollution is widespread in all areas and is often the outcome of years of planned or unintentional emission of pollutants (SAFER SOLUTIONS, N.D). The aim of the experiment was to investigate which soil absorbs the greatest amount of pollutants in the environment using the mediums: white sand, potting mix and soil from a garden. The pollutants involved in the experiment were, vegetable oil, petrol and engine coolant. The hypothesis is that a soil type with more porosity will have absorbed more of the pollutants. The potting mix, which has the greatest porosity, absorbed the most amount of the pollutant and the hypothesis was therefore supported.

Monday, June 14, 2010

Discussion

So after a lot of though i have finished my discussion... howeever, it's not too long. hopefully the quality-quantity thing works for me here...
The hypothesis was that a soil type with more porosity will have more space for the pollutant to fill and therefore it will absorb more of the pollutant. Sand has a porosity of 5-30%, sandstone (made up of sand) has a porosity of 55% and the porosity of potting mix is unknown. However, since the potting mix had coir dust in it, it can be assumed that it has a higher porosity than the typical soil found in a garden. If this is assumed, then the results from the experiment support the hypothesis and the experiment was successful as the aim of the experiment, to investigate which soil absorbs the greatest amount of pollutants in the environment, was fulfilled.
From the experiment, it was found that the potting mix absorbed the most amount of liquid in total, followed by the soil from the garden. The white sand absorbed the least. However, when it came to the experiments involving petrol, potting mix absorbed the least amount of the pollutant. It absorbed 26millilitres less than the white sand and 6 millilitres less than the soil from the garden. The reason for this is due to the pollutants’ viscosity. Viscosity is a liquid’s resistance to flow. A liquid that has a high viscosity will resist flowing more than a liquid that has a low viscosity. Oil has the highest viscosity out of the three pollutants followed by the diluted engine coolant. It was observed that the oil and engine coolant sat on top of the soils for a while when they had been poured on. This now can be concluded that this was because they both had higher viscosities. Petrol has a low viscosity; it has a lower viscosity than water. Potting mix is very porous and has very large void spaces, whereas the void spaces of the white sand and the soil from the garden are smaller and more compacted. This meant that the petrol passed through the potting mix much faster than it did for the white sand and the soil from the garden. After the 60 seconds had passed, the petrol may have only gotten half way through the white sand when it would have come through in the potting mix. Since the method used does not take into account the porosity of the pollutants, the method is not entirely reliable. However, the hypothesis can still be supported by the experiment as it still proves that a soil type with more porosity will absorb more of the pollutant.
well I think it's ok...i guess...

Saturday, June 5, 2010

Results

An observation made during the experiment was that when the vegetable oil and engine coolant were poured on each of the soil types, the vegetable oil would not pass through straight away. The vegetable oil and engine coolant would sit on the soils and then after about 15 seconds it would pass through.

yay!

I have FINALLY finished my experiment and am ready and bothered to put the pictures up so here they are:



pretty cool huh?
so now that i've done everything, i shall put up my method in "prose and passive past tense".
Method:
A table (as shown below in table 1) was drawn up so that the results could be recorded on. A metal drainer was placed on a dish and 250 grams of sand was measured and placed in the drainer. 250 millilitres of oil was then measured out and poured onto the sand. The oil was left to filter for 60 seconds and the amount of oil that resided in the dish was then subtracted from 250 millilitres to find out how much oil was actually absorbed by the sand. The experiment was then repeated the next day with oil and potting mix and oil and healthy soil from the garden. The day after that, the experiment was repeated except with petrol instead of oil and the day after that, it was repeated with engine coolant instead of oil. A week of analysis was then left in between and the entire experiment was repeated again for reliable results.
BTW: Table 1 is non- existent at the moment...

Thursday, May 13, 2010

OH MY GOSH!!!!!!!!!!!!

Dharani is like totally glad that she just posted in on time that she feels like SRPing...
Soil pollution is when the pollutants in soil are above a certain level causing the soil to lose one or more of its functions. Soil pollution may also be thought of as the presence of manmade chemicals or any other modifications in the natural environment. The most common chemicals causing soil pollution are: petroleum hydrocarbons, pesticides, lead used in cars and house paint and other heavy metals. The occurrence of this manifestation is linked with industrialisation and the intensity of chemical usage. Soil pollution is widespread in all areas and is often the outcome of years of planned or unintentional emission of pollutants.
NOW! how does THAT sound for a 1st paragraph?
(WOW)
So, what is porosity?
The percentage of pore volume or void space, or that volume within rock that can contain fluids.
http://www.glossary.oilfield.slb.com/Display.cfm?Term=porosity
(i will reference this properly when i figure out how to)

Climate graph


so here's my climate graph...
hehe...yeah i know it kinda looks like my graph has been trampled on by a herd of elephants but it wasn't my fault i made it in the holidays... ummmm... yeh...enjoy?

Method...

1. Place a filter on a cup(making sure it won't fall off)

2. Put 250 mg of sand in the filter

3. Measure out 250 mL of oil in the measuring cup

4. Pour the oil onto the sand and let the oil be filtered for 60 seconds

5. Remove the filter from the cup after 60 seconds of filteration

6. Record the amount of oil in the cup on a table

7. Subtract this amount from 250 to find out how much of the oil is actually absorbed by the sand

8. Record this number on the table as well

9. Repeat steps 1 to 8 with oil and clay instead of sand

10. After one week, repeat steps 1 to 9 but instead of oil use petrol

11. After another week, repeat steps 1 to 9 but instead of oil use engine coolant